Characteristics & Special Features for Pilot Press – I & II :

Available in “B” & “D” Tooling in both models.
Turret speed up to 42 RPM.
Force Feeder with A.C drive (Pilot Press II only)
AC Inverter Drive for main motor.
Inbuilt Pre-Compression (Pilot Press II only)
Adjustable upper punch penetration (Pilot Press II only)
Low noise level.
All controls are outside the machine.
User-friendly access.
Operator safety through upper guard interlocking.
PLC system as an optional feature (Pilot Press II only)
SCADA system as an optional feature (Pilot Press II only)

Technical Specification :

Models	PP- I D	PP- I B	PP- II D	PP- II B
No of Stations	10	10	10	10
Tooling	"D"	"B"	"D"	"B"
Max. Output (Tab/hr) *	25,200	25,200	25,200	25,200
Max. Pressure	4 Tons	4 Tons	4 Tons	4 Tons
Pre-Compression	-	-	1 Ton	1 Ton
Max. Tablet Dia	23 mm	16 mm	23 mm	16 mm
Depth of Fill	20 mm	17.4 mm	20 mm	17.4 mm
Electricals	2 HP, Single Ø, A.C	2 HP, Single Ø, A.C	2 HP, Single Ø, A.C	2 HP, Single Ø, A.C.

Note : Electric voltage & frequency can be provided as per customer's requirement.

The rights for the modifications in design & specs are reserved without prior notice.

*Practically, the max attainable output is approx 80 % of the designed one.
*The tablet output depends upon the following factors.

1. The physical and chemical properties of material to be compressed.
2. The tablet shape, weight and its thickness.
3. Ambient Conditions.

Top